Design + measure
We measure the space, check your survey against the Cooper City setbacks and size limits, and choose the style and roof.
Broward County pergola builder
Cooper City allows pergolas up to 230 square feet and 14 feet tall, with clear rules on how close they can sit to your fence. We size the pergola to fit, engineer it for Broward wind loads, and handle the permit.
Request a free design consult ↗
Built for Cooper City
The 230 sq ft cap is firm. A 15 by 15 ft pergola (225 sq ft) fits, but a 16 by 16 ft one (256 sq ft) does not. We confirm the size on your survey before you pick a style.
Cooper City also limits you to two accessory buildings that together cover no more than 35% of the rear yard. If you already have a shed, we count it in.
Cooper City is next to our Southwest Ranches base, and we build pergolas there often.

Cooper City pergola permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:
Sources: Cooper City Code, accessory building regulations; Cooper City Code Sec. 23-14; Florida Building Code. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.
Pergola options in Cooper City
Every pergola sits on footings sized for the structure and is anchored for South Florida wind loads.
Clean, low-maintenance frames with open or louvered tops.
Solid insulated panels that block sun and rain and keep the space cooler.
Warm timber frames sized and fastened for local wind requirements.
Freestanding covered seating on a properly built base.
The slab, footings, deck and shade planned as one project.
How a Cooper City pergola gets built
Size, setbacks and engineering get settled before anything is ordered, so the permit matches what gets built.
We measure the space, check your survey against the Cooper City setbacks and size limits, and choose the style and roof.
We prepare signed and sealed drawings for wind loads and submit the Cooper City permit and any HOA package.
Footings and the slab, pavers or deck go in first, then the pergola frame, roof and anchors.
Lighting and fan rough-in where planned, final inspection, and a walkthrough with you.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




How big a pergola can be in Cooper City →
The 230 sq ft cap, fence setbacks and the 35% rear-yard rule.
Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Cooper City coverage and setback rules.
Cooper City pergola questions
Clear answers before you get quotes.
Up to 230 sq ft and 14 feet tall.
At least 6 feet from the property line, or 3 feet if there is a 6-foot privacy fence and any easement releases are in hand.
Yes. Pergolas need a building permit with engineered drawings for Broward County wind loads. We prepare the drawings and manage the permit and HOA package.
Yes, up to two accessory buildings, as long as together they cover no more than 35% of the rear yard.
Start with the design
Send us your survey and a few photos. We’ll check the size and setback limits for your lot and walk you through style, engineering, permit, and timeline.