Design + measure
We measure the space, check your survey against the Pembroke Pines setbacks and size limits, and choose the style and roof.
Broward County pergola builder
Pembroke Pines caps freestanding pergolas at 200 square feet on most lots and sets clear setbacks and height limits. We size the pergola to fit, engineer it for Broward wind loads, and handle the permit.
Request a free design consult ↗
Built for Pembroke Pines
The 200 sq ft cap shapes most Pembroke Pines pergola designs. A 14 by 14 ft pergola (196 sq ft) fits, but 15 by 15 ft (225 sq ft) does not on a typical lot. Lots in A or R-E zoning can go larger if the pergola meets the main house setbacks.
Because we also pour the slab, set pavers and install turf, the footings and the patio are planned together instead of cut in later.
Pembroke Pines is right next to our Southwest Ranches base, and we build there often.

Pembroke Pines pergola permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:
Sources: Pembroke Pines Code §155.421 (lot coverage) and accessory structure regulations; Florida Building Code. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.
Pergola options in Pembroke Pines
Every pergola sits on footings sized for the structure and is anchored for South Florida wind loads.
Clean, low-maintenance frames with open or louvered tops.
Solid insulated panels that block sun and rain and keep the space cooler.
Warm timber frames sized and fastened for local wind requirements.
Freestanding covered seating on a properly built base.
The slab, footings, deck and shade planned as one project.
How a Pembroke Pines pergola gets built
Size, setbacks and engineering get settled before anything is ordered, so the permit matches what gets built.
We measure the space, check your survey against the Pembroke Pines setbacks and size limits, and choose the style and roof.
We prepare signed and sealed drawings for wind loads and submit the Pembroke Pines permit and any HOA package.
Footings and the slab, pavers or deck go in first, then the pergola frame, roof and anchors.
Lighting and fan rough-in where planned, final inspection, and a walkthrough with you.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




How big a pergola can be in Pembroke Pines →
The 200 sq ft cap, setbacks, height limits and a worked example.
Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Pembroke Pines coverage and setback rules.
Pembroke Pines pergola questions
Clear answers before you get quotes.
Up to 200 sq ft on most lots, no taller than the house or 24 feet, and at least 5 feet from side and rear lines. Lots in A or R-E zoning can go larger if they meet the main house setbacks.
Yes. Pergolas need a building permit with engineered drawings for Broward County wind loads. We prepare the drawings and manage the permit.
Yes, and we recommend it. Pouring the slab or setting pavers with the footings in mind avoids cutting and patching later.
Aluminum is the lowest maintenance. Insulated roofs block sun and rain and keep the space cooler. Wood looks warm but needs more upkeep. We help you choose based on use, budget and HOA rules.
Start with the design
Send us your survey and a few photos. We’ll check the size and setback limits for your lot and walk you through style, engineering, permit, and timeline.