Design + measure
We measure the space, check your survey against the Coral Springs setbacks and size limits, and choose the style and roof.
Broward County pergola builder
Coral Springs sets clear setbacks, height limits and overhang rules for freestanding pergolas. We size the pergola to fit, engineer it for Broward wind loads, and handle the City permit and HOA review.
Request a free design consult ↗
Built for Coral Springs
Freestanding pergolas, gazebos, tiki huts and insulated-roof structures in Coral Springs need 5 feet from rear and interior side lines, and 10 feet from a street side.
Height is tied to the house: no more than 80% of the house height, up to 14 feet. On a one-story home, that often sets the roof style.
Recent Coral Springs work includes a travertine pool deck with turf, and a pergola is a common next step for shade.

Coral Springs pergola permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:
Sources: City of Coral Springs Land Development Code, Ch. 25; Coral Springs Improvement District Permit Criteria Manual; Florida Building Code. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.
Pergola options in Coral Springs
Every pergola sits on footings sized for the structure and is anchored for South Florida wind loads.
Clean, low-maintenance frames with open or louvered tops.
Solid insulated panels that block sun and rain and keep the space cooler.
Warm timber frames sized and fastened for local wind requirements.
Freestanding covered seating on a properly built base.
The slab, footings, deck and shade planned as one project.
How a Coral Springs pergola gets built
Size, setbacks and engineering get settled before anything is ordered, so the permit matches what gets built.
We measure the space, check your survey against the Coral Springs setbacks and size limits, and choose the style and roof.
We prepare signed and sealed drawings for wind loads and submit the Coral Springs permit and any HOA package.
Footings and the slab, pavers or deck go in first, then the pergola frame, roof and anchors.
Lighting and fan rough-in where planned, final inspection, and a walkthrough with you.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




Coral Springs pergola, coverage and setback rules →
Coral Springs setbacks, height and overhang limits for pergolas.
Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Coral Springs coverage and setback rules.
Coral Springs pergola questions
Clear answers before you get quotes.
No more than 80% of the house height, up to 14 feet.
At least 5 feet from rear and interior side lines, and 10 feet from a street side. Overhangs can reach no more than 40% into the setback.
Yes. Pergolas need a building permit with engineered drawings for Broward County wind loads. We prepare the drawings and manage the permit.
Yes. Coral Springs treats tiki huts with the same freestanding setbacks as pergolas and gazebos.
Start with the design
Send us your survey and a few photos. We’ll check the size and setback limits for your lot and walk you through style, engineering, permit, and timeline.