Design + measure
We measure the space, check your survey against the Davie setbacks and size limits, and choose the style and roof.
Broward County pergola builder
Davie lots are big, and many have room for a pergola, outdoor kitchen and poolside shade. Accessory setbacks depend on your zoning district, so we check your survey, engineer the pergola for Broward wind loads and handle the Town permit.
Request a free design consult ↗
Built for Davie
Davie zoning ranges from AG and A-1 acreage to suburban R-1 lots, and accessory setbacks change with it. We confirm your district before we size the pergola.
A pergola with a solid roof counts toward building coverage, while an open-slat pergola usually doesn’t in the same way. That choice can decide how big you can go.
Recent Davie work includes a concrete and artificial grass patio with a pergola. See the photos below.

Davie pergola permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:
Sources: Town of Davie Land Development Code, Table 12-81A; Town of Davie Planning & Zoning staff reports; Florida Building Code. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.
Pergola options in Davie
Every pergola sits on footings sized for the structure and is anchored for South Florida wind loads.
Clean, low-maintenance frames with open or louvered tops.
Solid insulated panels that block sun and rain and keep the space cooler.
Warm timber frames sized and fastened for local wind requirements.
Freestanding covered seating on a properly built base.
The slab, footings, deck and shade planned as one project.
How a Davie pergola gets built
Size, setbacks and engineering get settled before anything is ordered, so the permit matches what gets built.
We measure the space, check your survey against the Davie setbacks and size limits, and choose the style and roof.
We prepare signed and sealed drawings for wind loads and submit the Davie permit and any HOA package.
Footings and the slab, pavers or deck go in first, then the pergola frame, roof and anchors.
Lighting and fan rough-in where planned, final inspection, and a walkthrough with you.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




Davie pergola, coverage and setback rules →
Accessory setbacks by zoning district and how roofed pergolas count.
Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Davie coverage and setback rules.
Davie pergola questions
Clear answers before you get quotes.
Yes. Pergolas need a Town building permit with engineered drawings for Broward County wind loads. We prepare the drawings and manage the permit.
It depends on your zoning district. Many districts require at least 5 feet from the rear line. We check your survey and district before we design.
A pergola with a solid roof counts toward building coverage. An open-slat design may give you more room, and we compare both for your lot.
Yes. Pouring the slab or setting pavers with the footings in mind avoids cutting and patching later.
Start with the design
Send us your survey and a few photos. We’ll check the size and setback limits for your lot and walk you through style, engineering, permit, and timeline.