Design + measure
We measure the space, check your survey against the Weston setbacks and size limits, and choose the style and roof.
Broward County pergola builder
Weston’s planned communities expect a pergola to look like it belongs to the house. We design to the City’s accessory setbacks and your HOA’s standards, engineer for Broward wind loads, and handle both approvals.
Request a free design consult ↗
Built for Weston
Most Weston homes sit inside an HOA, and architectural review usually controls pergola style, color and roof material. We prepare drawings and samples for that review first.
Accessory buildings follow the house setbacks in Weston, with limited reductions to 5 feet on the side and rear in the rear half of the lot. That usually decides where a pergola can sit.
If you want walls or an enclosed cabana instead of an open pergola, Weston’s rules on enclosed accessory uses apply, and we walk you through the difference.

Weston pergola permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:
Sources: City of Weston Code §124.36 and §125.62; City of Weston Permit Submittal Requirements; Florida Building Code. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.
Pergola options in Weston
Every pergola sits on footings sized for the structure and is anchored for South Florida wind loads.
Clean, low-maintenance frames with open or louvered tops.
Solid insulated panels that block sun and rain and keep the space cooler.
Warm timber frames sized and fastened for local wind requirements.
Freestanding covered seating on a properly built base.
The slab, footings, deck and shade planned as one project.
How a Weston pergola gets built
Size, setbacks and engineering get settled before anything is ordered, so the permit matches what gets built.
We measure the space, check your survey against the Weston setbacks and size limits, and choose the style and roof.
We prepare signed and sealed drawings for wind loads and submit the Weston permit and any HOA package.
Footings and the slab, pavers or deck go in first, then the pergola frame, roof and anchors.
Lighting and fan rough-in where planned, final inspection, and a walkthrough with you.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




Weston pergola, coverage and setback rules →
Accessory setbacks, cabana limits and AE coverage in Weston.
Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Weston coverage and setback rules.
Weston pergola questions
Clear answers before you get quotes.
In most Weston communities, yes. HOA review and the City permit are separate steps. We prepare the HOA package first, then file the City permit.
Accessory buildings follow the house setbacks, with limited reductions to 5 feet side and rear in the rear half of the lot.
Yes. Enclosed accessory uses like cabanas can total no more than 25% of the house footprint and must match the house’s roof, materials and colors.
Yes. Pergolas need a building permit with engineered drawings for Broward County wind loads. We handle the drawings and permit.
Start with the design
Send us your survey and a few photos. We’ll check the size and setback limits for your lot and walk you through style, engineering, permit, and timeline.