Broward County driveway contractor

Concrete driveways in Pembroke Pines.

Pembroke Pines caps how much of your front yard and lot width a driveway can cover, and the swale apron has to stay flat. We design driveways to those limits from the first sketch, then permit and build them.

Request a free design consult ↗
Modern concrete slab driveway with grass joints by Concrete Solutions Today, Broward County, FL

Built for Pembroke Pines

A driveway planned for your lot and your street.

Most Pembroke Pines driveway projects are widenings or replacements on established lots in Chapel Trail, SilverLakes and Pembroke Falls. The 40% front-yard rule is usually what sets the final size, so we run that math before we draw panels or joints.

The swale matters too. City code requires the driveway to be graded flat from the sidewalk to the road, without a dip, so we set the apron elevations as part of the design rather than at the pour.

Pembroke Pines sits right next to our Southwest Ranches base, and we work there often.

Driveways throughoutChapel TrailSilverLakesPembroke FallsGrand Palms
Concrete driveway with grass strips by Concrete Solutions Today, Broward County, FL

Pembroke Pines driveway permits

What the Pembroke Pines permit asks for.

We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:

  • Driveways can cover no more than 40% of the front yard, and the total width of all driveways can’t exceed 40% of the lot width.
  • Driveways need a 5-foot setback from side property lines and 15 feet from a street side. Extensions must give a paved area at least 10 feet wide.
  • Driveways across the swale must be graded flat from the sidewalk straight to the road, without any dip.
  • Building permits use the Broward County Uniform Building Permit Application, the required affidavits and cover sheets, and two sets of plans, filed online through the city’s Development Hub.
  • Owners do ask the Board of Adjustment for more coverage, as in a 2024 request for 51% front-yard coverage, but a variance is never guaranteed. We design to the 40% limit first.

Sources: Pembroke Pines Code §155.620 (driveway coverage) and §52.26 (driveways across swale areas); Pembroke Pines Board of Adjustment minutes, March 7, 2024; City of Pembroke Pines Building FAQ. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.

How a Pembroke Pines driveway gets built

Four steps from design to final inspection.

Each step settles the decisions the next one depends on, so the jobsite stays organized.

01

Design + measure

We measure the site, check your survey and setbacks, and lay out panels, joints, and the approach.

02

Permit + approvals

We prepare the Pembroke Pines permit package and any HOA submittal, then schedule the work once approved.

03

Prepare + pour

Demolition, grading, compaction, forming, and reinforcement, then a coordinated pour and finish.

04

Inspect + complete

We pass final inspection, review edges and drainage with you, and leave care instructions.

Our project work

Recent work by our crews.

Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.

Modern concrete slab driveway with grass joints by Concrete Solutions Today, Broward County, FL
Modern concrete slab driveway with grass joints · Broward County, FL
Concrete driveway with grass strips by Concrete Solutions Today, Broward County, FL
Concrete driveway with grass strips · Broward County, FL
Circular concrete driveway with grass joints by Concrete Solutions Today, Broward County, FL
Circular concrete driveway with grass joints · Broward County, FL
Aerial view of a concrete slab driveway and walkway by Concrete Solutions Today, Broward County, FL
Aerial view of a concrete slab driveway and walkway · Broward County, FL

How big a driveway can be in Pembroke Pines →
The 40% front-yard rule, setbacks and a worked example for a 7,500 sq ft lot.

Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Pembroke Pines coverage and setback rules.

Pembroke Pines driveway questions

What Pembroke Pines homeowners ask first.

Clear answers before you get quotes.

Can I widen my driveway past 40% of the front yard in Pembroke Pines?+

Only with a variance from the Board of Adjustment. Plan for the 40% limit unless you are ready to apply for one. We run the front-yard and lot-width numbers before we finalize the design.

Can my driveway apron dip at the swale?+

No. Pembroke Pines code §52.26 requires the driveway in the swale area to be graded flat from the sidewalk straight to the road, without any dip.

How close to my neighbor can the driveway be?+

At least 5 feet from the side property line, or 15 feet from a street side. Zero-lot-line homes have their own rule.

Do I need a permit for a new driveway in Pembroke Pines?+

Yes. As a Florida Certified General Contractor, we prepare the survey markup, plans and Broward County permit application, file it through the Development Hub, and schedule the inspections.

Start with the design

Planning a new driveway in Pembroke Pines?

Send us a photo and a rough size. We’ll schedule a site visit, measure, and walk you through layout, finish, permit, and timeline.

Request your free consultation