Design + measure
We measure the site, check your survey and setbacks, and lay out pattern, borders and drainage with samples on your Parkland property.
Broward County paver contractor
Parkland homeowners often want pavers or natural stone that match a newer home and an HOA’s approved palette. We design the layout, prepare the City’s paver checklist, and build the base for the long run.
Request a free design consult ↗
Built for Parkland
Parkland’s newer communities favor large-format pavers, travertine and clean borders that tie the driveway to the entry and pool. We plan the materials together so the front and back of the house read as one design.
Most Parkland neighborhoods have an HOA with its own review. We prepare samples and drawings for the association, then submit the City permit with a survey that shows exactly where the pavers go.

Parkland paver permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what the city looks for:
Sources: City of Parkland Driveway/Pavers/Concrete Slab Checklist; City of Parkland Building FAQ. Requirements change, so we confirm the current checklist with the city before every submittal.
Paver options in Parkland
Most paver problems start below the surface. Every job gets a compacted base, bedding sand, a solid edge restraint and slope away from the house.
Concrete, brick or travertine pavers on a compacted base with a concrete edge restraint.
Paver and stone patios, garden paths and entry walks laid to drain away from the house.
Cool-to-the-touch stone and porcelain decks with matching coping.
Soldier courses, banded borders, bullnose steps and coping that finish the edges.
Pavers or stone slabs separated by artificial grass strips for a modern look.
Lift and relay sunken areas, refill joints and seal to protect color.
How a Parkland paver job gets built
The base work in step three decides how the pavers look in ten years, so we never rush it.
We measure the site, check your survey and setbacks, and lay out pattern, borders and drainage with samples on your Parkland property.
We prepare the Parkland permit package and any HOA submittal, and schedule the work once approved.
We remove the old surface, excavate, then place and compact the base in lifts before screeding the bedding sand.
We lay and cut the pavers, set the edge restraint, sand and compact the joints, pass final inspection and seal when ready.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




Parkland paver questions
Clear answers before you get quotes.
Yes. Parkland lists pavers among the work that needs a permit, and the Driveway/Pavers/Concrete Slab Checklist asks for a survey showing the pavers, total paved area and setbacks.
Parkland wants a survey no more than a year old, or a Homeowner Survey Affidavit confirming nothing has changed. If anything has been added since, we’ll recommend an updated survey.
Yes. We often use the same travertine or paver family front and back, with a different size or border at the pool so the deck stays comfortable underfoot.
Most driveways take about a week on site once permitted, and pool decks a little longer. HOA review and the City permit usually take more time than the installation.
Start with the design
Send us a photo of the area and a rough size. We’ll schedule a site visit, bring samples, and walk you through layout, base, permit and timeline.