Design + measure
We measure the site, check your survey and setbacks, and lay out pattern, borders and drainage with samples on your Boca Raton property.
Palm Beach County paver contractor
Boca Raton publishes an exact construction standard for paver block driveways, from paver strength to base and edge restraint. We build to it and complete the notarized driveway affidavit the City requires.
Request a free design consult ↗
Built for Boca Raton
Boca Raton homeowners often ask for travertine, coral stone or large-format pavers that match the architecture of the house and the community. We help choose materials that fit the style and your HOA’s guidelines.
Where the drive meets the street, the City’s design standard sets the paver strength, base thickness and concrete edge restraint. Building to that standard keeps the apron from spreading and keeps the sidewalk route through the driveway level.

Boca Raton paver permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what the city looks for:
Sources: City of Boca Raton Driveway Design Standards Affidavit. Requirements change, so we confirm the current checklist with the city before every submittal.
Paver options in Boca Raton
Most paver problems start below the surface. Every job gets a compacted base, bedding sand, a solid edge restraint and slope away from the house.
Concrete, brick or travertine pavers on a compacted base with a concrete edge restraint.
Paver and stone patios, garden paths and entry walks laid to drain away from the house.
Cool-to-the-touch stone and porcelain decks with matching coping.
Soldier courses, banded borders, bullnose steps and coping that finish the edges.
Pavers or stone slabs separated by artificial grass strips for a modern look.
Lift and relay sunken areas, refill joints and seal to protect color.
How a Boca Raton paver job gets built
The base work in step three decides how the pavers look in ten years, so we never rush it.
We measure the site, check your survey and setbacks, and lay out pattern, borders and drainage with samples on your Boca Raton property.
We prepare the Boca Raton permit package and any HOA submittal, and schedule the work once approved.
We remove the old surface, excavate, then place and compact the base in lifts before screeding the bedding sand.
We lay and cut the pavers, set the edge restraint, sand and compact the joints, pass final inspection and seal when ready.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




Boca Raton paver questions
Clear answers before you get quotes.
The City’s paver block driveway standard calls for ASTM C936 pavers rated at least 8,000 psi, on a 6-inch compacted limerock base with 1 inch of sand bedding. We spec pavers that meet it.
It’s a notarized form where each driveway standard is initialed, confirming the work will follow the City’s design details. We complete it with you as part of the permit package.
Not in the right-of-way. Boca Raton’s standards don’t allow loose rock there. We can use it inside the property line, or use pavers or turf joints for the same look.
Yes. We often run the same stone family from the entry to the pool, choosing a finish and thickness suited to each area.
Start with the design
Send us a photo of the area and a rough size. We’ll schedule a site visit, bring samples, and walk you through layout, base, permit and timeline.