Design + measure
We measure the area, note trees, drains and easements on your survey, and choose turf and infill with you.
Broward County artificial turf installer
Southwest Ranches requires a large share of every plot to stay pervious, and the Town decides how turf counts. We plan turf areas with that in mind and install them on a base that drains.
Request a free design consult ↗
Built for Southwest Ranches
On big lots, turf usually goes where it does the most work: around the pool, in play and pet areas, and as a putting green. Pasture and open lawn usually stay natural.
The Town counts as pervious only surfaces that let water soak in. We confirm with the Town how your turf system will be treated before counting it toward the 40% or 60% minimum.
Concrete Solutions Today is based in Southwest Ranches, so we plan around the Town’s reviews from the start.

Southwest Ranches turf permits
We’re a State of Florida Certified General Contractor (CGC1527850). We prepare the permit package, submit it, and schedule every inspection. Here’s what applies:
Sources: Southwest Ranches district regulations (pervious area) and Sec. 080-160; Florida Rule 62-308.100; Section 125.572, Florida Statutes. Requirements change, so we confirm the current rules with the city before every submittal. This is general information, not legal advice.
Artificial turf options in Southwest Ranches
Turf fails from the bottom up. Every install gets a porous rock base, proper slope, anchored edges and seams you can’t see.
No-mow turf lawns on a drained rock base, with clean edges at beds and walkways.
Concrete panels with turf strips, each joint built on its own drained base.
Turf lines and lawn areas planned with the deck so the pool area drains.
Shaped putting surfaces with fringe turf, next to the pool or patio.
Stone or paver slabs set with turf joints for a softer modern look.
How a Southwest Ranches turf job gets built
The base in step three decides whether the turf drains after a summer storm, so we don’t rush it.
We measure the area, note trees, drains and easements on your survey, and choose turf and infill with you.
We prepare any Southwest Ranches permit and HOA submittal, and schedule the install once approved.
We remove sod and roots, cap sprinkler heads in turf areas, set edging, and compact a washed, porous rock base.
We roll out and seam the turf, anchor every edge, brush in the infill, and walk the finished area with you.
Our project work
Real photos from Concrete Solutions Today job sites. Each caption shows where the project was built.




Southwest Ranches pervious rules and turf →
How the pervious minimums and the state turf rule apply on acreage.
Check your lot in the South Florida Lot Simulator →
See how much driveway, deck or pergola fits under the Southwest Ranches coverage and setback rules.
Southwest Ranches turf questions
Clear answers before you get quotes.
Only if the Town agrees it lets water soak in. We confirm how your turf system will be treated before counting it toward the 40% or 60% minimum.
It covers single-family lots of 1 acre or less. Many Southwest Ranches lots are larger, so the Town’s own rules govern.
Around the pool, in play and pet areas, and for putting greens, where it saves the most mowing and mud.
Yes. Concrete Solutions Today is based in Southwest Ranches.
Start with the design
Send us a photo of the area and a rough size. We’ll measure, check the rules for your lot, and walk you through turf, base, permit, and timeline.